This is an old revision of the document!

---

====== Kitchen Display Software Setup ====== ==== Over View ==== CCS typically uses Logic Controls bump bars. The setup of the KDS software is done from the Config.ini file located in the computer running the KDS system. This is usually the server. The KDS System Software uses the same printer settings that are on each terminal. Typically this will be the same as the server, which is where the Software is located. However, if the locations for the printers are not showing up properly, copy the reportsettings.mdb file from one of the POS terminals, to the 'c:\program files\cafe cartel' directory of the server. ===== Control Panel ===== CCS Office has settings for the aspects of the KDS. 1. Orders can be colorized based on their type. CCS Control Panel - Order Types - Change List Color, then save the order type. 2. Notification - the KDS will flash when orders reach a time limit. CCS Control Panel - Peripherals - Kitchen Display Settings Set the "Header Flash" and the "Background Red Settings" Select Auto print if you wish the items to appear on the KDS as they are entered in the POS System. ===== Config.ini ===== The config.ini file must have these settings under the defaults section PrepMonitorDefault = [nameoflocation] ShowPrepMonitorButtons = 0 or 1. 0 Will not show the buttons on the prep monitor, 1 will. If you are using a Bump bar ShowPrepMonitorButtons should be set to 0. ==== Bump Bar Settings: ==== F2 Moves to the Previous Group F3 Moves to the Next Group F4 Bumps the Order F5 Changes Printer Location F6'Show/Hide Toggles Bumped/UnMade Orders F7 UnBumps Order F8 Selects Next Item in Current Order F9 Selects Previous Item in Current Order F10 Bumps Selected Item in Order F11 Adds more Lists to the Display. F12 Removes Lists from the Display Numeric Keys 0-9 Selects Orders 1-10 on the screen. Right Arrow Moves to the Next Order Left Arrow Moves Previous Order